Get Adobe Flash player
HHO Categories
Categories

Hho Alternator

Yes it has been a while since I planned this but I only got the electrode yesterday afternoon !! If this doesn’t work, I can put a 1mm fibre optic cable for …
Video Rating: 5 / 5

I created this video with the YouTube Video Editor (http://www.youtube.com/editor)

this video is for the guys asking about my modified 12v alternator. now we can manually control the output to higher voltages, say 28v. i reacon this is what stan meyers was doing in his original patents. lower current, higher voltage, PLUS mechanical input for big gas outputs. the resonant ‘sweet spot’ more in the modified alternator than the cell. Stan Meyers never did seem to have much to say about his alternator just ‘gas rate control unit’ ‘resonant charging choke circuits’ and bingo… it’s in the lab, on the buggy, hardly mentioned, the frigging modified alternator.
Video Rating: 5 / 5

a system in which an alternator has had its regulator and diode pack removed and a new diode setup is in place, im running into a multi tap transformer giving a push pull resonance and output of 200volts (frequency aprox 216 hrtz) and at 1800rmp and only 5 volts going in .. perfect for a wind generator or higher powered hho cell (maybe) .. grin .. stanley would be impressed .. now we can see resonance in the bifilar coil(transformer) doing the push pull and the alternator as the amplitude and frequency modulators.. yes the diodes get hot but the transformer stays cool thankyou
Video Rating: 4 / 5

bike alternator test with hho you can feed hho into air intake…for less fuel consumption tap water..

316L Seamless Tubing Meyer Style 3 TUBES 9″ LONG Outer 1″ OD Inner 3/4″ OD 12VOLTS PULSED TO THE ALTERNATOR 0.13 AMPS
Video Rating: 0 / 5

NOW THATS MORE LIKE IT 316L Seamless Tubing Meyer Style 3 TUBES 9″ LONG Outer 1″ OD Inner 3/4″ OD 12VOLTS PULSED TO THE ALTERNATOR APPROX 0.50 AMPS! still need to spin the alt a little faster for best results.
Video Rating: 0 / 5

316L Seamless Tubing Meyer Style Outer 1″ OD Inner 3/4″ OD 12VOLTS PULSED TO THE ALTERNATOR APPROX 0.37 AMPS! TAP WATER

316L Seamless Tubing Meyer Style 7 TUBES 9″ LONG Outer 1″ OD Inner 3/4″ OD 12VOLTS PULSED TO THE ALTERNATOR APPROX 0.95 AMPS! DISTILLED WATER ONLY COULD BE MORE EFFICIENT IF MY MOTOR WAS HIGHER RPM. WILL DO MORE TESTS ONCE NEW MOTOR IS RECEIVED.
Video Rating: 0 / 5

316L Seamless Tubing Meyer Style 3 TUBES 9″ LONG Outer 1″ OD Inner 3/4″ OD 12VOLTS PULSED TO THE ALTERNATOR APPROX 0.50 AMPS! still need to spin the alt a little faster for best results. Noticed that one tube produces a little better than the other due to sst clamps. Will rewire them separate to equalize the volts.
Video Rating: 5 / 5